0086-21-61182423
Section Steel
Latest News
You are here : section steel--Katalor steel > H beam steel > 正文EN10025 S235JR H beam steel

EN10025 S235JR H beam steel

EN10025 S235JR H beam steel

EN10025 S235JR H beam steel under EN10025 standard , S235JR H beam steel is one mainly of Carbon and low alloy steel. for more information about EN10025 S235JR H beam steel , please see the following :

S235JR H beam Chemical composition


Chemical elements
C≤ 16mm
max
C>16mm
max
Si
max
Mn
max
P
max.
N max Cu max S
max.
%,by mass 0.17 0.20 -- 1.40 0.045 0.012 0.55 0.045

S235JR H beam Mechanical properties

> 40 ≤ 63 Designation Minimum yield strength ReH a MPab Nominal thickness mm Tensile strength Rm a Mpab Nominal thickness mm
According EN 10027-1 and CR 10260 According EN 10027-2 ≤ 16 > 16 ≤ 40 > 40 ≤ 63 > 63 ≤ 80 > 80 ≤ 100 > 100 ≤ 150 > 150 ≤ 200 > 200 ≤ 250 > 250 ≤ 400c < 3 ≥ 3 ≤ 100 > 100 ≤ 150 > 150 ≤ 250 > 250 ≤ 400c
S235JR 1.0038 235 225 215 215 215 195 185 175 - 360 to 510 360 to 510 350 to 500 340 to 490 -

S235JR H beam steel is a structural grade (S) with at minimum yield strength of 235 N/mm²m, the JR designation confirms that the steel has undergone longitudinal Chary V-Notch impact testing at 27J (Joules) at room temperature. Shanghai Katalor Industry Co., Ltd Will return you with high-quality products and complete after-sale service with the lowest price. We have large quantities of S235JR H beam steel stock with thicknesses up to 200 mm. The minimum thickness is normally 5 mm. any need in EN10025 S235JR H beam steel , please contact katalor!

Home | about | Section Steel | Specification | Stock | Contact
Katalor [email protected]
Copyright © 2018 by Shanghai Katalor Industry Co., Ltd All rights reserved